Step/Method

1

Kunshan carton drawing carton sample drawing. Draw a black white draft knife line drawing of the carton, each with a precise size of the box, requiring very accurate lines.

2

Draw the imposition design drawing According to the carton sample drawing the printable max paper size, carry out the imposition design. The imposition design should consider saving paper facilitating the automatic removal of waste edges after die cutting. Draw an imposition design diagram according to the imposition design.

3

Copy imposition design drawings Copy two imposition design drawings, one for printing one for die-cutting, which can ensure consistency accurately register during die-cutting.

4

The imposition design is transferred to the plywood can be drawn by hand copied by photo. Manual depiction must be highly accurate.

5

There is a special sawing machine for drilling sawing, which is a wire saw that moves up down. Drill holes at the junction of the two box cores, which is convenient for threading saws sawing along the tangent fold lines. The thickness of the wire saw should be compatible with the thickness of the die cutting knife line the creasing knife line.

6

Wire inserting Machines such as guillotine machines, wire bending machines, punching machines, etc., are used to break, round bend the knife wire into various angles according to the shape of the box. The height of the cross-cutting knife line is 23.8 mm the thickness is 0.7 mm. The cutting line embedded on the die-cutting plate must be of the same height. The height thickness of the crease line depends on the thickness of the paper. The height of the crease knife line is the height of the die cutting knife line minus the thickness of the paper. After the knife line is inserted, foam rubber should be attached to both sides so that the cardboard can be ejected the die-cutting plate.

7

Kunshan corrugated cardboard box manufacturers make die-cut negative templates in order to obtain a good seam. Paste insulating paper on the steel plate, put it in the machine, put the carbon paper, cover with a layer of cardboard. Turn on the machine to press it to obtain the indentation. Make a crease line on the indentation.